Autowatch Ghost Immobiliser Installation
The Ghost is the UK’s most advanced aftermarket immobiliser for CAN buses. It is discrete It does not include LED indicators or key fobs and is hidden in the wiring of the vehicle.
The user can also deactivate the system temporarily by using Transport Mode when renting their vehicle. This guide will guide you through the steps of installing an Ghost immobiliser.
Professional Installation
The Autowatch Ghost immobiliser is a modern security device that guards your vehicle from hacking, key cloning, and relay attacks. The system is linked directly to the ECU of your vehicle and protected by a pin code you select. It is not detected by thieves using diagnostic scanners or other advanced methods. It isn't able to be disabled using circuit cuts.
The system is simple to use, however professional installation is recommended to ensure a smooth connection to the ECU of your vehicle. An approved installer from Thatcham can assist with the installation and programming of your Ghost system. They can also suggest a tracking or alarm system to complete the security package for your vehicle.
To prevent an accidental deployment of airbags or short circuits The installer must first remove your battery. When the battery is disconnected, the installer may be able to work safely. Basic hand tools are useful for making precise connections and a multimeter may be used to verify electrical values and safety. Insulation tape and cable ties are also vital for protecting connections and keeping wiring neat. In addition, the user's manual offers specific instructions specifically tailored to the Ghost Immobiliser model you have.
During the installation process, it's essential to choose the right grounding location that is free of paint and debris. Installers must also ensure that the immobiliser's wires, CAN H and the CAN L are connected to the correct ECU ports. The wires can be plugged in or soldered based on the model. To ensure a stable and long-lasting connection it is recommended that you choose a top-quality plug.
After the installation is completed Once the installation is completed, the customer can enable after the installation is complete, the customer can activate Transport Mode. This allows the vehicle to be used by valet parking attendants or mechanics without having to know the pin code. To accomplish this, the user must hit the service button on the dashboard 5 times in a matter of 2 seconds. The system will confirm this by displaying five indicators.
The Autowatch Ghost 2 is a highly effective immobiliser that's TASSA certified and Thatcham approved. It's a great choice for anyone who frequently rents out their vehicles through platforms such as Turo. An immobiliser can reduce the cost of insurance, as it reduces the risk of theft.
Getting Started
You can't go far wrong using an autowatch immobiliser for those who want to safeguard your car from thieves. The device prevents your vehicle from starting even if someone steals or copies your key. It's possible due to its advanced technology, which prevents the engine from starting until the correct PIN code is entered.
The device connects to the CAN bus network of your vehicle, allowing it to communicate with the ECU directly. It uses the buttons on your dashboard and steering wheel to create a unique sequence which only you are aware of. This makes it impossible for anyone else to start your vehicle. This is the best security system that protects your most precious possessions and preserve its value when you want to sell it in the future.
Installing a ghost immobiliser is a simple process, but it is important to follow the instructions carefully to avoid problems with the electrical system and malfunctions. First, you must find and locate a permanent 12V power source and a good grounding point on the chassis of your vehicle. After that, you are able to begin to connect the wires to the immobiliser. Make sure to use high-quality connectors and soldering methods to ensure a secure connection. Also, ensure that you cover the connections with heat shrink tubing and insulation tape to protect them from short circuits in electrical power and other issues.
Once the wires are connected, you can connect the battery and start the engine to test the immobiliser's functionality. If ghost immobiliser birmingham is functioning properly then you can put it in a secure place beneath the dash or anywhere else in the vehicle. Be sure to cover it in a secure manner to prevent any thief from taking advantage of it.
The Ghost 2 immobiliser is TASSA (Tracker and Aftermarket Security System Association) certified this means it complies with the highest standards of security and is an excellent deterrent to car thieves. It offers superior protection against key cloning, hacking, and relay attacks, and it isn't able to be disabled unless you know the code. The device is also simple to use and is able to be put into the service valet mode to ensure that your car is not activated when you take it in for maintenance or an MOT.
Wiring
The Ghost Immobiliser is a cutting-edge security system that's designed to stop theft of vehicles. It communicates with your vehicle's ECU and directly connects to the CAN bus. Unlike other aftermarket systems that require the removal of circuit components the Ghost Immobiliser won't interfere with any of your vehicle's factory settings.
The system is also undetectable by thieves using diagnostic scanning tools. This is due to the fact that it doesn't transmit and receive radio frequency signals and it relies on CAN data to communicate with your ECU. It also doesn't require modifications to your current key fobs.
Enter your sequence for disarming (either two or one buttons) and then switch on the ignition of your vehicle to use Ghost Immobiliser. The indicator will flash twice to verify that you have entered the correct code. Now you can begin driving your car safely.
Once installed The Ghost Immobiliser can protect your car from key cloning and hacking and will also protect the value of your pride and joy. In Transport Mode, you can temporarily disable the Ghost Immobiliser if you have to hand your vehicle to service or valet park.
To complete the Ghost Immobiliser installation, you'll have to find a source of constant power (12V) and a grounding point. Make sure both are well-insulated and able to be touched. It's also recommended to use cable tie to secure and bundle the wires. This will reduce the risk of being tampered with by thieves. To avoid making mistakes, double-check these points and mark them using a label or tape. Check every connection for signs that they are wearing out. Loose connections can lead to system malfunctions, so be sure that they're firmly fixed and well-insulated. Make sure to test your Ghost Immobiliser after installation has been completed. This will ensure that the unit is functioning correctly, and that all connections are safe and well-insulated. If there are any issues, you must be sure to address them immediately.
Testing
The Autowatch Ghost Immobiliser is an innovative vehicle security system that is integrated into your car's ECU to block unauthorised engine start. The innovative technology it uses protects your car against key cloning and hacking and other methods that thieves employ to steal cars. The Ghost works in conjunction with existing tracking and alarm systems to provide the best security for your car. This system's unmatched features and subtle design make it a preferred choice for car lovers and security-conscious drivers alike.
In order to ensure that the Ghost Immobiliser is properly integrated the Ghost Immobiliser, you must to follow every step of the installation procedure. A good starting point is to refer to the vehicle's wiring diagram, which will serve as a guideline for locating and connecting the wires required. After that, you'll need determine the power source and grounding points. Once you've identified these then you'll be required to mark them so that they're easy to identify during the installation process. It is essential to use top-quality materials and tools. Basic hand tools will assist you in making precise connections. A multimeter can verify electrical values, and also ensure safety. Insulation tape and cable ties will help keep all connections tidy and neat. Additionally, a user's manual will provide specific guidance tailored to your Ghost model.
Before beginning the installation it is important to test the system by entering the PIN code and starting the vehicle. This step will confirm that the immobiliser functions according to plan, and prevents unauthorised vehicle starts. This step should be done regularly as part of your routine inspections of the vehicle to ensure the system is always working correctly.
Once the installation is complete Once the installation is complete, you can drive your car with confidence. The Ghost will safeguard your vehicle from would-be car thieves. It will ensure that no one can escape with your car if they do not have the correct PIN code. The Ghost can be paired with an approved Thatcham tracker that detects any attempts to steal or tamper with. This allows you to track your vehicle if it is stolen.
The Ghost is compatible with a range of vehicles, including those from the majority of major manufacturers. Monty's Locksmith can assist you in securing your vehicle using this cutting-edge device. Contact us today to learn more about our services and installation options. We are a TASSA registered installer, a certificate that guarantees we follow strict standards for the installation of our products. This assures insurance companies, customers and law enforcement officials that all installations are completed safely and in a correct manner.